Voipac - The Embedded Professionals
PRODUCTS
PXA270 DIMM Base Board specification - Headers:
- 1x IDE 2x22pin, 2mm header (ATA2 interface for HDD or CDROM)
- 1x USB SWITCH 2x3pin, 2.54mm header
- 1x DISPLAY 2x13pin, 2.54mm header
- 1x BACKLIGHT 4pin, 2.54mm header
- 1x TOUCH 4pin, 2.54mm header
- 1x JTAG 2x10pin, 2.54mm header
- 1x I2C 4pin, 2.54mm header
- 1x BT UART 2x3pin, 2.54mm header
- 1x STD UART 4pin, 2.54mm header
- 1x SSP 2x3pin, 2.54mm header
- 1x IDE 2x22pin, 2mm header (ATA2 interface for HDD or CDROM)
- 1x USB SWITCH 2x3pin, 2.54mm header
- 1x DISPLAY 2x13pin, 2.54mm header
- 1x BACKLIGHT 4pin, 2.54mm header
- 1x TOUCH 4pin, 2.54mm header
- 1x JTAG 2x10pin, 2.54mm header
- 1x I2C 4pin, 2.54mm header
- 1x BT UART 2x3pin, 2.54mm header
- 1x STD UART 4pin, 2.54mm header
- 1x SSP 2x3pin, 2.54mm header
PXA270 DIMM Base Board
This product is in MATURITY PHASE.
Product in this life cycle phase is no longer recommended for new designs.
This multi-purpose development board has been designed as a carrier board for the PXA270M and PXA270 DIMM Modules.
It does not only provide a flexible development environment necessary to explore the full functionality of the PXA270M and PXA270 DIMM Modules, but when used with a module and 2.5" HDD, closed in a stylish aluminum case, the set turns into a ready-to-use adapter-powered PXA270(M) EMBEDDED PC containing all the standard PC peripherals.
The board provides an analog VGA connector for the direct connectivity to a generic CRT and TFT screens, supporting maximum resolution of 1024x768 pixels / 65536 colors in a 16 bit mode. The connectivity to the passive and active LCDs with 4-wire resistive touch screens is realized via the carrier board connectors and headers. The keyboard and mouse can be connected through PS2 or USB connectors. The board further includes Audio input and output, reset buttons, mini USB, outlet of a PCMCIA interface, MMC/SD card, and Compact Flash. The PXA270 DIMM base board has on board 5V switching power supply with input voltage ranging from 7V to 37V. Maximum output current of the regulator is 3A thus limiting baseboard, module and all connected peripherals to 15W maximum power consumption. The fanless carrier board also provides configurable switches, buttons, GPIO pins and LEDs for user friendly interaction thus simplifying programming of one's own applications.
To accelerate your own product development, Voipac can upon request supply you with all of the difficult-to-get components used on its boards, such as the 200pin SO DIMM socket (3D view) or the pitch compression JTAG connector.
PXA270 DIMM Base Board specification - Connectors:
- 1x RJ45 (10/100Mbps Ethernet)
- 1x VGA DSUB15 (16bit)
- 1x RS232 DSUB9 male (terminal output)
- 2x USB-Host (stacked)
- 1x USB OTG 2.0 device mini (PC2PC networking supported)
- 2x Jack stereo 3.5mm (stereo LINE IN/OUT, Microphone mono IN)
- 2x PS/2 DIN6 mini (mouse and keyboard controller)
- 1x PCMCIA socket
- 1x Compact Flash socket
- 1x MMC/SD card socket
- 1x DDR1 2.5V SODIMM 200pin socket
- 1x JTAG (board-to-board pitch compression connector)
- 1x RESET push button
- 1x USER push button (GPIO1)
- 1x Power jack 5.5/2.1mm
- 3x LED HOLDER stacked
Real Time Clock battery backup
Power supply: 7-37V
Dimensions: 168 x 105mm
For the prototyping purposes, the PXA270 DIMM Base Board can be supplied in any requested configuration for no extra charge (10+ pcs). For the detailed specification, datasheets, schematics, BOM file, binaries, installation guidelines and more, please visit the Downloads section.
It does not only provide a flexible development environment necessary to explore the full functionality of the PXA270M and PXA270 DIMM Modules, but when used with a module and 2.5" HDD, closed in a stylish aluminum case, the set turns into a ready-to-use adapter-powered PXA270(M) EMBEDDED PC containing all the standard PC peripherals.
The board provides an analog VGA connector for the direct connectivity to a generic CRT and TFT screens, supporting maximum resolution of 1024x768 pixels / 65536 colors in a 16 bit mode. The connectivity to the passive and active LCDs with 4-wire resistive touch screens is realized via the carrier board connectors and headers. The keyboard and mouse can be connected through PS2 or USB connectors. The board further includes Audio input and output, reset buttons, mini USB, outlet of a PCMCIA interface, MMC/SD card, and Compact Flash. The PXA270 DIMM base board has on board 5V switching power supply with input voltage ranging from 7V to 37V. Maximum output current of the regulator is 3A thus limiting baseboard, module and all connected peripherals to 15W maximum power consumption. The fanless carrier board also provides configurable switches, buttons, GPIO pins and LEDs for user friendly interaction thus simplifying programming of one's own applications.
To accelerate your own product development, Voipac can upon request supply you with all of the difficult-to-get components used on its boards, such as the 200pin SO DIMM socket (3D view) or the pitch compression JTAG connector.
PXA270 DIMM Base Board specification - Connectors:
- 1x RJ45 (10/100Mbps Ethernet)
- 1x VGA DSUB15 (16bit)
- 1x RS232 DSUB9 male (terminal output)
- 2x USB-Host (stacked)
- 1x USB OTG 2.0 device mini (PC2PC networking supported)
- 2x Jack stereo 3.5mm (stereo LINE IN/OUT, Microphone mono IN)
- 2x PS/2 DIN6 mini (mouse and keyboard controller)
- 1x PCMCIA socket
- 1x Compact Flash socket
- 1x MMC/SD card socket
- 1x DDR1 2.5V SODIMM 200pin socket
- 1x JTAG (board-to-board pitch compression connector)
- 1x RESET push button
- 1x USER push button (GPIO1)
- 1x Power jack 5.5/2.1mm
- 3x LED HOLDER stacked
Real Time Clock battery backup
Power supply: 7-37V
Dimensions: 168 x 105mm
For the prototyping purposes, the PXA270 DIMM Base Board can be supplied in any requested configuration for no extra charge (10+ pcs). For the detailed specification, datasheets, schematics, BOM file, binaries, installation guidelines and more, please visit the Downloads section.