iMX6 Rex SATA Disk Module

The 8GB SATA Disk Module is available for optional storage or for direct boot of iMX6 OpenRex SBC, iMX6 TinyRex Module and iMX6 Rex Module. It provides enough capacity to run an operating system, and is supplied together with power cable. Power is provided by the SBC or Tiny/Rex Base Board.
Volume price table
Quantity 1 - 9 10 - 99 100 - 999 1000+
Unit price* 39 EUR 36 EUR 29 EUR 23 EUR

* For orders exceeding 1 000 units, or customized configuration quotes, please submit your request.

Available on stock

• ideal choice for space constrained embedded systems

• provides optimal balance of performance, capacity, reliability and cost

• stores the data and OS of industrial applications under a light performance configuration

• contains DRAM buffer which increases IOPS (Input/Output Operations per Second)

• unique hook design keeps SDM securely in place

• used MLC flash management provides industry standard functionality such as: built-in hardware ECC (Error Correction Code), static/dynamic wear-leveling, flash bad-block management, S.M.A.R.T., power failure management, ATA secure erase and TRIM command support

• MLC flash type

• 7-pin SATA 3.1 (6Gb/s) interface

• +5V power (by the provided cable)

8GB capacity (32GB version without plastic housing available upon request)

• sustained read/write speed 105/24 MB/s

• plastic housing dimensions 32.50 x 29.40 x 8.53 mm

• MTBF: >1,000,000 hours

• 0°C to +70°C Commercial temperature range (-40°C to +85°C range available upon request)

• Lead free, REACH / RoHS compliant